Installation procedure
Install the decorative panel
(3)The circuit of the decorative panel
6Connect the wire end of the louver motor installed on the decorative panel (referring to Figure 7).
Figure 7
<The indication diagram of circuit> Side of indoor unit
(different from the actual condition)
3.Installation of air inlet grille and corner cover *(1)Install the air inlet grille
*The reversed procedure to the “the preparation of decorative panel” part.*****
When installing the air inlet grille, be careful not to wrap the wire of the louver motor.
(2)Install the corner cover on the corner
**As1 Figure 8 shown, tie the rope of the corner cover on the cleat of the decorative panel.
*2Install the corner cover on the decorative panel (referring to Figure 9).
Cleat
Slide the 5 buckles to install the
corner cover and make it meet with 
the holes in the decorative panel
Figure 8 | Figure 9 |
33
