Haier 0010571570 Timer On/Off function, After turning on the unit, set the desired working mode

Operation instruction Timer On/Off function

	**	**	**
	**
	**		**
**	**		**
	**	****	**
	**/**

Before using TIMER function, calibrate the clock first (referring to page 4). When you wake up in the morning, before going back to home after work or after going to bed, you can let your air conditioner automatically turn on or turn off.

1.Turn on the unit

After turning on the unit, set the desired working mode.

The LCD of the wire controller will show working mode. (except for Timer, Sleep, Swing)

2.Set of TIMER mode

Press the TIMER button to change the TIMER mode, each press the TIMER mode will change as the following sequence:

ON	OFF	ON	OFF	Blank
AM		AM	PM
	PM
TIMER ON	TIMER OFF	TIMER ON-OFF

Then choose the timer mode as you need (TIMER ON or TIMER OFF.)

At this time the " ON " or " OFF " will flash.

3.Set time

Press the time adjusting button

*Each press, the set time increases 10 minutes. If depress the button, the

time will increase rapidly.

*Each press, the set time decreases 10 minutes. If depress the button, the time will decrease rapidly.

This LCD will show the time set, the time can be adjusted within 24h. (AM stands for morning, PM stands for afternoon).

4.Confirm the time

After calibration of the clock, press SET button to confirm time.

At this time, the*	ON	or*	will not flash.
			OFF

The time displayed is: at x o’clock x minutes the unit will be turned on (TIMER ON) or turned off (TIMER OFF).

Cancel TIMER

Press the TIMER button several times until the TIMER mode display disappears.

Hints:.

*

After power failure, the clock should be calibrated again.

The wire controller has memory function, when you use this function for the second time, if the time set is the same as the previous one, you just need to choose the TIMER mode then press the SET button to confirm.

11