Domestic Air Conditioner | |
Model: |
. Change the set temperature. With temperature adjusting function
. The wind volume is the automatic medium
. When in frost removing mode, the outdoor unit does not accept the communication signal for powerful running
. After 15 minutes of powerful running, the compressor can not be off within 10 minutes
Change the set temperature. With temperature adjusting function
. The wind volume is the automatic strong
. After the compressor starts, there will be no
. Send the silent running signal to the outdoor unit
The wind volume is SSLO after the compressor is on
The wind volume will be kept SSLO within 20 seconds after the compressor stops and then changes to weak
The wind volume is SSLO
6. Timed running
. Set the time duration according to the time difference between the clock for
timing and the current clock
. In timing mode, the display panel will flash the light at fixed times
When this function is set, operation modes on the panel display will not change. The timing icon will show and the operation stops when the set time comes.
When this function is on, the panel display will only show a timing icon. The unit will operate as the set mode when the time comes.
The unit will start operating or stop according to the order of your setting.
7. Automatic running
Under this mode, the MCU will choose the work mode according to the room temperature so as to keep the set termperature ( set 23℃ for heating mode and 26℃ for cooling mode)
When the unit is powered on for the first time and the the room termperature is equal to or below 23℃, it will start the heating mode or the cooling mode when the room temperature is higher than 23℃
Enter into the heating mode and follow the heating process(supposed temperature 23℃). When the temperature is high enough to stop the compressor, thecompressor stops and there
30
