![](/images/new-backgrounds/1065184/6518421x1.webp)
840129200 Ev01.qxd 7/6/04 9:07 AM Page 11
Cleaning, Storage and Maintenance
1.Wash bowl, cover, blade, discs, removable drive sleeve, food gate, and food pusher in hot, soapy water. Rinse and dry thoroughly. See page 5 for information on how to remove food chute lid for cleaning.
NOTE: Do not store unit with cover in locked position; this may put strain on interlock tab.
2.Wipe base, control panel, and cord with a damp cloth or sponge.
To remove stubborn soil, use a mild
NEVER IMMERSE THE BASE IN WATER OR OTHER LIQUID.
3.To store, place bowl on base. Then place Chopping/Mixing Blade on motor shaft and Slicing/Shredding Disc on Chopping/Mixing Blade. The Removable Drive Sleeve may be stored in the bowl. Place cover on bowl but do not lock.
4.Monthly place a drop of vegetable oil on each screw in the food chute.
How to Release Suction Cup Feet After Use
The suction cup feet on the bottom of your Big Mouth™ Food Processor are designed to keep the unit stationary during use. To maximize the life of your Big Mouth™ please review the following directions:
With Big Mouth™ fully assembled: lift it from counter by
placing hands
under unit as
shown and lifting to one side.
OR
With Big Mouth™ fully assembled: lift it from counter by
grabbing the han- dle as shown and lifting from same
side as handle.
OR
With bowl and lid removed from Big Mouth™: lift it
from counter by
placing hands
under unit as
shown and lifting to one side
11