Page 22SKU 96067 for technical questions, please call 1-800-444-3353.
to.MoUnt.tHe.MaCHine.onto.tHe.stand
Attach the Support Bracket to the Stand, using four Hex Head Bolts, four Spring
Lock Washers, and four Hex Nuts. (see.figure.d.and.assy..diagrams,.pages.37,.
39.)
Step on the Footwheels to lower the Casters. Then move the Stand parallel to the
Machine. Step on the Footwheels twice more to raise the Casters to keep the Stand
from moving. (see.figure.G.and.assy..diagrams,.pages.37,.39.)
With assistance and a proper lifting device, lift the Machine onto the Stand.
Attach the Tailstock Support Bracket to the Stand.
(see.figure.G.and.assy..diagrams,.pages.37,.39.)
Remove the two shipping Bolts, and install the two Lock Knobs on the Powerhead
Support Bracket. (see.figure.G.and.assy..diagrams,.pages.37,.39.)
Install the Lock Knob on the Tailstock Support Bracket. (see.figure.G.and.assy..
diagrams,.pages.37,.39.).......
1.
2.
3.
4.
5.
6.

fiGURe.f

fiGURe.G

Foot Wheel (109)