TO ASSEMBLE THE LATHE TOO REST
Insert the Tool Rest Post into the Arm. Then tighten the Socket Setscrew using an Allen Wrench (not included). (See Figure H and Assy. Diagrams, pages 44, 55.)
FIGURE H
TO ATTACH A SAW BLADE TO THE ARBOR
1.Insert the 3/4” Collet into the Spindle. Rotate the Collet until you feel its Keyway slot engages the Spindle Key.
(See Figure I, next page and Assy. Diagram, page 42.)
2.Insert the Drawrod into the Powerhead, and rotate the Drawrod until it catches the threads of the Collet. (See Figure I, next page and Assy. Diagram, page 42.)
3.Insert the Saw Arbor into the Collet, and tighten the Drawbar to secure the Arbor in the Collet. (See Figure I, next page and Assy. Diagram, page 42.)
4.With the Saw Teeth pointing toward the front of the Powerhead (toward the operator), place the Saw Blade on the Arbor. Then place the Spacer on the Arbor.
(See Figure I, next page and Assy. Diagram, page 42.)
5.Install the Nut on the Arbor, and firmly tighten with a wrench.
(See Figure I, next page and Assy. Diagram, page 42.)
SKU 96067 | For technical questions, please call | Page 23 |
