2.Do not alter or adjust any part of the Metal/Woodworking Machine or its internal mechanisms that are assembled and supplied by the manufacturer or distributor.
3.Always follow and complete scheduled maintenance.
NOISE PRECAUTION
Prolonged exposure to high noise levels is hazardous to hearing. Always wear
TABLE SAW SAFETY RULES
1.Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Table Saw.
2.Do not force the Table Saw. This tool will do the work better and safer at the speed and capacity for which it was designed. Do not force the Saw Blade into the workpiece being cut.
3.
WARNING! Keep hands and fingers away from cutting area and Saw Blade. Use a “push stick” (not included) if necessary.
4.Never leave the Table Saw unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.
5.Always use Saw Blades with a 7” to 12” diameter, 5/8” round arbor hole, and rated at 7200 RPM or greater. Saw Blades that do not match the mounting hardware of the Table Saw or that are rated less than the required minimum RPM will run eccentrically causing loss of control or may fly off the Saw, resulting in severe personal injury and/or property damage.
6.Do not use the Table Saw for cutting metals or for cutting curves. This will cause the Saw Blade to break and/or reduce its service life.
7.Make sure the Table of the Table Saw and surrounding area are clear with the exception of the workpiece to be cut.
8.Before using the Table Saw, check to make sure the Saw Blade is properly mounted on the Saw Spindle. Always adhere to safety warnings and instructions provided by saw blade manufacturer. Make sure the Saw Blade is
SKU 96067 | For technical questions, please call | Page |
