Page 6SKU 96067 for technical questions, please call 1-800-444-3353.
do.not.overreach...keep.proper.footing.and.balance.at.all.times.. Proper
footing and balance enables better control of the power tool in unexpected
situations.
Use safety equipment. Always wear ANSI-approved safety impact
...........goggles.when.using.this.product...Dust mask or respirator,
nonskid safety shoes, hard hat, or hearing protection must be used for
appropriate conditions. Always wear ANSI-approved safety goggles and
a dust mask/respirator when using or performing maintenance on this tool.
tooL.Use.and.CaRe
do.not.force.the.tool...Use.the.correct.tool.for.your.application.. The correct
tool will do the job better and safer at the rate for which it is designed. Do not
force the tool and do not use the tool for a purpose for which it is not intended.
do.not.use.the.Metal/Woodworking.Machine.if.its.power.switch.does.not.
turn.it.on.or.off...Any equipment that cannot be controlled with the Power Switch
is dangerous and must be replaced.
turn.off.the.power.switch.and.disconnect.the.power.Cord.before.making.
any.adjustments,.changing.accessories,.or.storing.the.Metal/Woodworking.
Machine...Such preventive safety measures reduce the risk of starting the
tool accidentally...always.turn.off.the.power.switch.and.disconnect.the.
power.Cord.before.performing.any.inspection,.maintenance,.or.cleaning.
procedures.
store.idle.tools.out.of.reach.of.children.and.other.untrained.persons...Tools
are dangerous in the hands of untrained users.
Maintain.tools.with.care...keep.the.Metal/Woodworking.Machine.clean.
Properly maintained tools are less likely to malfunction and are easier to control.
Do not use a damaged tool. Tag damaged tools “Do not use” until repaired.
Check.for.misalignment.or.binding.of.moving.parts,.breakage.of.parts,.
and.any.other.condition.that.may.affect.the.tool’s.operation...if.damaged,.
have.the.tool.serviced.before.using. Many accidents are caused by poorly
maintained tools.
Use.only.accessories.that.are.recommended.by.the.manufacturer.for.your.
model...Accessories that may be suitable for one tool may become hazardous
when used on another tool.
seRviCe
Tool service must be performed only by qualied repair personnel. Service
or maintenance performed by unqualied personnel could result in a risk of injury.
4.
5.
1.
2.
3.
4.
5.
6.
7.
1.