Hawking Technology HNC290G manual Profile List, Configure the Profile

Profile List

Profile List	The “Profile List” allows you to manage the networks you connect to
	frequently. The profile list displays all the profiles and their
	corresponding settings, including Profile Name, SSID, Channel, etc. If
	you want to connect to any of the profiles on the list, double-click the
	profile or select the profile and click “Activate”. The network camera
	will then automatically connect to the selected profile.
Add/Delete/Edit Button	Click these buttons to add/delete/edit the selected profiles.
Activate Button	Click “Activate” to connect to the selected profile. When a profile is
	activated, the card will initially be connected to the profile.
Configure the Profile
Profile Name	Allows you to define a recognizable profile name so that you can
	identify the different profiled networks.
SSID	The SSID (up to 32 printable ASCII characters) is the unique name
	used to identify a wireless LAN (WLAN). The ID prevents the
	unintentional merging of two co-located WLANs.
	You may specify an SSID for the card and then only the device with the
	same SSID can interconnect to the card. If you want to add one of the
	networks nearby to the profile list, pull down the menu, and all of the
	networks nearby will be listed. Thus, you can add one of them to the
	profile list.
Channel	This setting is only available for Ad Hoc mode. Select the number of
	the radio channel used for networking. The channel setting should be
	the same as the channel of the network you are connecting to.
Network Type	Infrastructure: This operation mode requires the presence of a Wireless
	LAN Access Point or Router. All communication occurs via the
	Access Point or Router.
	Ad-Hoc: Select this mode if you want to connect to another wireless
	station in the Wireless LAN network without an Access Point or
	Router. Select this option if you want the network camera to operate in
	peer-to-peer mode.

26