6.2.4 Motion Detection

The HNC290G features built-in motion detection with snapshot emailing. In order to utilize this feature, you will have to enable it either in the “Network Settings” section of the camera’s web UI, or in the “Motion Detection” section of the Administrator Utility, as shown in the figure below. Once enabled, the system will email still image snapshots to the person or party specified in the “Recipient Email Address” field, as detailed in Section 6.2.3 Email Settings from the previous page in this user’s manual. The user can define the number of snapshots to be emailed for each detected event, as well as the frequency with which he/she wants events to be detected. Please see the instructions below.

Motion Detection

Enable Motion Detection

Motion detection is disabled by default. Click on “Enable” to begin

 

using the motion detection function.

Frames per Detected

In this field, the user can select the number of still-image snapshots

Event

he/she would like to be emailed per instance of detected motion. The

 

field is set at “3” by default.

Event Detection Interval

In this field, the user can select the interval of time, in seconds, he/she

 

would like between consecutive events for motion detection. The field

 

is set at “10 seconds” by default. Please note that this camera does not

 

have the capability to detect motion continuously.

 

 

29

Page 29
Image 29
Hawking Technology HNC290G manual Motion Detection