3 Framing and Clearances
NOTE:
•Illustrations reflect typical installations and are FOR DESIGN PURPOSES ONLY.
•Illustrations/diagrams are not drawn to scale.
•Actual installation may vary due to individual design preference.
A.Selecting Appliance Location
When selecting a location for your appliance it is important to consider the required clearances to walls (see Figure 3.1).
WARNING
Fire Risk
Provide adequate clearance:
•Around air openings
•To combustibles
• For service access
Locate appliance away from traffic areas.
NOTE: For actual appliance dimensions refer to Section 13.
GLASS | FLUSH TO EXTERIOR INSULATED ENVELOPE |
|
B
GLASS
A
B
In addition to these framing dimensions, also reference the following section:
• Clearances and Mantel Projections (Sections 3.B and 3.C)
D
E
GLASS
C
GLASS
B
FLUSH TO EXTERIOR INSULATED ENVELOPE
| A | B | C | D | E |
| Minimum | Minimum | - | Minimum | - |
Inches | 43 | 1/2 | 24 | 36 | 43 |
Millimeters | 1092.2 | 12.7 | 609.6 | 914.4 | 1092.2 |
Figure 3.1 Appliance Locations
Heat & Glo LifeStyle Collection • | 7 |
