Hearth and Home Technologies SL-750TRSFHHIPI owner manual Notch

NOTCH

STEP 4.

LOG #3 (SRV2066-703)Place log #3 on right side of grate. The notch on the log should fit over the bar on the far right side of the grate. Push the right side of log #3 against the grate tab and pull the left side forward until it comes into contact with the burner detail as shown in Figure 1.

STEP 5.

LOG #4 (SRV2066-704)Place log #4 so that the notch is touching the first grate tine and is laying in the flat spot of log #2. The right end of log #4 should touch the back refractory panel. See Figure 14.7.

STEP 6.

LOG #5 (SRV2065-705)Place log #5 on log #2. Log #5 will mate with the grooves located on the top side of Log #4. See Figure 14.8.

2

3

1

LOG/BURNER DETAIL CONTACT AREA

Figure 1.

LOG TOUCHES REFRACTORY PANEL

2

4 3

1

NOTCH

Figure 14.7

MATE WITH GROOVES HERE

5 2

4

3

1

Figure 14.8

62 Heat & Glo • SL-750TRSFHHIPI • 2156-900 Rev. F • 11/08