Hearth and Home Technologies SL-750TRSFHHIPI owner manual Dvp-Trap, Horizontal Termination Cap

B. Vent Components Diagrams (continued)

Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The heat shield is designed to be used on a wall 4 in. to 7-1/4 in. (102 mm to 184 mm) thick. If wall thickness is less than 4 in. (102 mm) the existing heat shields must be field trimmed. If wall thickness is greater than 7-1/4 in. (184 mm) a DVP-HSM-B will be required.

8in.

(203 mm)

Heat

Shield

15-1/8 in.
(384 mm)
					Term Cap	Minimum	Maximum
						Effective Length	Effective Length
					Trap1	3-1/8 in.	4-5/8 in.
						79 mm	117 mm
		12 in.		Max	Trap2	5-3/8 in.	9-3/8 in.
			Effective
	(305 mm)					137 mm	238 mm
			Length

DVP-TRAP

Horizontal Termination Cap

DVP-TRAP1 DVP-TRAP2

DVP-TRAPK1 DVP-TRAPK2

DVP-HPC1 DVP-HPC2

Figure 16.3 DVP vent components

68 Heat & Glo • SL-750TRSFHHIPI • 2156-900 Rev. F • 11/08