Heat & Glo LifeStyle 8000CL-IPI-S, 8000CL-IPI-T C.Refractory, Grate and Valve Assembly Removal

C.Refractory, Grate and Valve Assembly Removal

It may become necessary to remove the refractory, grate and valve assemblies. This task should be performed by a qualified service technician. The refractory, grate and base refractory do not need to be removed to service the burner assembly.

Figure 3.2 Side Refractory Removal

To remove the top refractory panel, lift the top refractory panel up using both hands, slide it forward as much as possible and carefully lower it.

To remove the side refractory panels, slide the panel for- ward as shown in Figure 3.2. Rotate the panels and re- move as shown in Figure 3.3. Remove the back refractory panel by lifting it over the burner assembly.

NOTICE: Remove refractory before removing grate. If grate is removed first, damage to refractory will occur.

Note: Refractory is Fragile.

Handle with care.

Figure 3.3 Side Refractory Removal

Note: The refractory must be removed before removing the grate.

Figure 3.4 Grate Removal

16

Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T, 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev. S • 9/12