Heat & Glo LifeStyle 6000CL-IPI-T B. Vent Components Diagrams continued, DVP-TRAP1, DVP-TRAP2

B. Vent Components Diagrams (continued)

Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The heat shield is designed to be used on a wall 4 in. to 7-1/4 in. (102 mm to 184 mm) thick. If wall thickness is less than 4 in. (102 mm) the existing heat shields must be field trimmed. If wall thickness is greater than 7-1/4 in. (184 mm) a DVP-HSM-B will be required.

8 in.

(203 mm) Heat Shield

15-1/8 in.

(384 mm)

		Term Cap	Minimum	Maximum
			Effective Length	Effective Length
	Max
12 in.		Trap1	3-1/8 in.	4-5/8 in.
(305 mm)	Effective		79 mm	117 mm
DVP-TRAP	Length
		Trap2	5-3/8 in.	9-3/8 in.
Horizontal Termination Cap			137 mm	238 mm

DVP-TRAP1 DVP-TRAP2

DVP-TRAPK1 DVP-TRAPK2

DVP-HPC1 DVP-HPC2

Figure 16.4 DVP vent components

Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T, 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev. S • 9/12

71