Heat & Glo LifeStyle 8000CL-IPI-T manual D. Burner Identification/Verification, Base Refractory

Note: The base refractory must be removed to access screws.

BASE REFRACTORY

Figure 3.5 Base Refractory Removal

Figure 3.6 Valve Assembly Removal

D. Burner Identification/Verification

The burner may be accessed for identification and veri- fication purposes. This task should be performed by a qualified service technician. The base refractory, valve plate, refractory panels and grate do not need to be re- moved to access the burner assembly. The logs and fi- ber burner top need to be removed to access the burner. Disconnect the pilot from the burner before removal. See Figure 3.7 for burner identification chart. Notch patterns are located on bottom side of burner.

	NOTCH LOCATION
				NG			LP
			6000C
			6000CL
			6000CLX
			6000CBV
			8000C
			8000CL
			8000CLX
			8000CBV
Figure 3.7	Burner Identification
	Heat & Glo	•	6000CL-IPI-S, 6000CL-IPI-T, 8000CL-IPI-S 8000CL-IPI-T •	2165-900 Rev. S	•	9/12	17