Heat & Glo LifeStyle 6000CL-IPI-S, 8000CL-IPI-S C. Doors, Finishing Material 1 Inch Thick or Less

C. Doors

Only doors certified for use with this appliance model may be used. Contact your dealer for a list of doors that may be used. Once you have determined what kind of door and finishing material is going to be used on the fireplace, you may use the table below which shows the door mod- els and the finishing material thickness allowed.

DOOR	FIT	FINISH MATERIAL	SEE
		THICKNESS	FIGURE
Folio	Inside	Any	13.6
Arcadia	Overlap	1 inch or less	13.4
	Inside	Greater than 1 inch	13.5
Halston	Overlap	1 inch or less	13.4
	Inside	Greater than 1 inch	13.5
Chateau	Overlap	1 inch or less	13.4
	Inside	Greater than 1 inch	13.5
MT Hammer	Overlap	1 inch or less	13.4
	Inside	Greater than 1 inch	13.5
Galleria	Overlap	1 inch or less	13.4
	Inside	Greater than 1 inch	13.5
CF	Inside	Any	13.6

Note: Finishing strips may be used to aid in positioning of non-combustible facing materials for some of the facing and door combinations specified in the table above. They must be removed following finishing work. See figure 13.7.

Finishing Material:

1 Inch Thick or Less

Remove Finishing Strips. See Figure 13.7.

NOTICE: Remove finishing strips before firing appliance.

1 in. MAX.

DOORFINISHING MATERIAL (TOP EDGE)

Finishing materials 1 inch maximum thick.

Stop finishing material flush with opening.

FINISHING STRIP NOT USED

(See Figure 13.7 for removal instructions)

NON-COMBUSTIBLE

FINISHING MATERIAL

Figure 13.4 Finishing Material 1 Inch Thick or Less

54

Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T, 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev. S • 9/12