SavePalet is used with moving light scene programming to enable you to repeat settings of the various attributes during later programming. You may save 16 settings of each fixture attribute. Remember that it works with any individual attribute, not whole scenes; whole scenes may be repeated using COPY.
Here is an example of how you might use SavePalet to facilitate your color programming. Read the instructions below in conjunction with the scene programming procedure beginning on page 24.
SAVING
1(a).
1(b).
1(c).
1(d).
1(e).
1(a). All 16 fixtures are selected.
1(b). Program the scene as normal and select the color attribute.
1(c). Adjust all fixture color wheels to blue.
1(d). Press SavePalet
1(e). Save ‘all selected fixtures to blue’ to touchkey no. 1.
RECALLING
2(a).
2(b).
2(c).
2(d).
2(a). Select the fixtures to progam.
2(b). Program the scene as normal and select the color attribute.
2(c). Press touchkey no. 1
2(d). All selected fixtures go blue.
30