BUTTONS OR TOUCHKEYS FOR PLAYBACK

3. Press the pushbutton or touchpad you wish to program. The selected key flashes. Remember that you have available two pages of buttons and two pages of touchkeys. Select the page using the buttons on the left. If the key is in use, you will get the message KEY STILL ACTIVE. You must ESCAPE and switch off the key before you re-program it.

PRIORITY RULES FOR PLAYBACK

You may assign multiple effects to one output key in combinations of scenes, chases and channels. You may assign one look only to a key. The look will suppress any other existing key contents. Should you later decide to remove the look, the original contents of the key will be restored.

During playback later button presses will have priority over earlier ones because of the last takes precedence rule.

Where multiple effects are assigned to a single key, the Power Cue DMX has its own system of rules for deciding priorities. Where, for example, there are multiple chases, it will give priority to the last-selected ones and channels called by multiple chases will respond to the higher priority ones. Where there is a mix of scenes, zones and chases, the order of priority is first chases, then zones, then scenes.

You may assign effects to a key already containing a show but these effects will be suppressed until the show is removed from the key.

•Press Prog/Edit •Press Key •Select a pushbuttonor touchkey •Select Scene, Chase Channel or Look

•Continue over page

47