subsequent selection. An attempt to make a second link will produce the message in the display ‘No linkable channels’. Links cannot apply to transparent channels.
If you adjust a linked channel in the client scene, the link for that channel is broken and the link to the preset is broken completely if all linked channels are manually adjusted. Channels (in client scenes) which have been manually adjusted must be made transparent before they can be linked again. Linked channels in client scenes must be unlinked before a new link can be established.
Do not use the Overlay function in a scene which also calls up Presets. To do so will kill any links to presets.
3. Scroll to the desired scene and press STORE.
4. Press Fixture and then select fixtures
using the 16 push buttons.
•Press Prog/Edit
•Press Scene
•Select a Memory
•Select Fixtures•Press Preset•Select PresetScene•Edit 7.The display shows that the preset is in place. You may now edit individual channels/attributes (page 26, no. 6) but note that you will break links with the preset for each channel/attribute that you edit.
8.You can see from the scene channels list that there is a Lnk/Nolnk and to which scene. In the scene list an L alongside the scene indicates that the scene in linked to presets.
33