SELECTING SCENE ATTRIBUTES - GENERIC LIGHTING

1.Press Prog/Edit.

2.Press Scene.

5(a). Scroll through the options under the Type button. If you select MOVING ZONE, this screen appears and you can then adjust the various attributes. When step is not audio, speed is enabled and may be adjusted using the trackball. Slope is either switch or crossfade. Loop is either loop or one-shot. When you push dim the level may be adjusted using the trackball. Bump through the various patterns to choose the zone effect you want. Press STORE when finished. Note that the speed refers to the time in minutes and seconds taken for one cycle of the zone pattern.

OR 5(b). Scroll through the options under the Type button. If you select SOUND-TO- LIGHT, this screen appears. If you now go back into the channels menu, you will notice that the channels no longer have levels but are tagged bass, tenor, alto and treble. You can select each channel and change the bass, tenor, alto and treble settings using the trackball.

40

Remember that an audio input connection is not absolutely necessary. The Power Cue DMX is equipped with an internal microphone to run audio functions. It is disabled by inserting a jack plug into the audio socket.

TIP!