A show is a combination of events - scenes, chases, channels and looks. Events may be switched in and out of a show and this makes it different from a look which is a single snapshot of the outputs.
The Power Cue DMX allows you to program a show in real time, so that while you play back a series of events, the Power Cue DMX memorises the events, the order in which they are played and their duration.
1.Press Prog/Edit
2.Press Show
50
AdjustSpotsLive
Recording starts on first keypress and stops on ESCAPE RECORDING SHOW (elapsed time)
Find | View | Levels Capture | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4.Press RealTime
AdjustSpots
Find | View | Levels Capture | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
5.Use the output pushbuttons and touchkeys to run and record your effects. Press ESCAPE to end recording. While recording the display shows the elapsed time for the show.
The buttons Find, View, Levels and Capture are dealt with in the section on RUN MODE.
By setting up a patch of the appropriate output key, it is possible to patch a show to a fader on the Fader Panel.
TIP!