3.Scroll to the desired scene and press

4. Press Group.

STORE. If you are editing a previously-

 

programmed scene, you may enter the scene

 

number on the alphanumeric keypad, instead

 

of scrolling through the scene list. Enter all

 

three digits, e.g. 009, not just 9.

 

Apreviously-programmed scene will have a name. You may overwrite or edit such scenes.

Where there are several scenes with the same name, the Power Cue DMX will give them a number in additional to the name. For example, if two scenes are programmed with the name open white, the first one is referred to as open white and the second one as open white [001].

7.EITHER Press STORE to save and then name the scene as described in previous sections.

OR Press ATTRIB, to define how the selected channels within the groups(s) will function within the scene. See the next section over the page.

•Press Prog/Edit

•Press Scene

•Select a memory•Press Group•Select Groups•Select level •Press STORE

39