When you set Auto Check to on, as described in the system options section later in this manual, the Power Cue DMX automatically checks for programming errors and corrupt data held in memories.
1.When you are programming, if you see the arrowed message, press STORE to track down the error.
2.Press each of the buttons in turn to identify in which type of program the error occurs. Press STORE to list the errors.
The display changes according to the button that you press. In this example there is an error in chase programming.
One scene, occurring in three different locations is the problem. Further investigation might show that this scene is a ZONE and cannot be included in a chase.
3.The occurrences of the error are listed, Press ESCAPE to exit,
34