Hitachi 32LD9600 PREPARATION continued Safety Precaution on Main Unit Installation, English

Models: 32LD9700U 32LD9600 32LD9700C 37LD9600 37LD9700U 37LD9700C 37LD9700N 32LD9700N

1 79
Download 79 pages 12.93 Kb
Page 14
Image 14
PREPARATION (continued)

PREPARATION (continued)

Safety Precaution on Main Unit Installation

Read SAFETY PRECAUTIONS ( 4 to 7 ) carefully besides this page.

*The Desktop Stand has been used for the illustration in this manual.

When installing the main unit, be sure to use the specified mount units in order to obtain maximum performance and maintain the safety.

We assume no responsibility or liability for personal injuries or property damages caused by use of other mount units or improper installation.

As for the installation instruction, please read each user’s manual of the mount units: for Desktop Setup, Wall Mounting, and Ceiling Mounting.

In case of using Wall or Ceiling Mounting unit, by contacting your local dealer, ask the specified installation specialist to set up. Never attempt to install it by yourself. It could cause injuries or damages.

ENGLISH

Please leave the adequate space around this unit in order to avoid increasing the internal temperature and keep safety while using swivel function.

Make sure not to block any ventilation holes.

Do not install the unit in the small space such as inside the rack, closet or the box.

Leave more than 10cm of clearance from each side of unit and 30cm from the top of unit to wall.

10cm

30cm

10cm

or more

or more

or more

 

10cm or more*

Cord

or

chain

Clamp

Without Swivel function: Leave at least 10cm of clearance behind rear unit.

With Swivel function: Leave the adequate space to obtain the maximum performance of Swivel Function.

(32" models: 25cm , 37" models: 29cm) Refer to 51 for Swivel Function.

Anti-Tumble Measures

Install in a stable place and implement safety measure against overturning.

Securing on desktop

Using commercially available wood screws, secure the set firmly in position by fastening them to the screw holes at the rear of the stand as shown in the diagram.

Wood screw

Two places

Securing to a wall or pillar

Using a commercially available cord, chain, and clamp, secure the set to a wall or pillar.

Cord or chain

Cord or chain

Hook

Screw

ClampRead SAFETY PRECAUTIONS ( 4 to 7 ) carefully besides this page.

Wall or pillar

Securing to ceiling

Using a commercially available cord, chain, and clamp, secure the set to a ceiling.

NOTE

Anti-Tumble Measures For more information regarding the mounting of the unit, please contact your dealer.

Securing on desktop Loosen a cord or chain enough while operating power swivel to avoid physical injury.

Securing to a wall or pillar Please install the unit in a sensible location where it does not expose anyone to the danger of knocking into the unit, causing injury to themselves or the LCD TV.

13

Page 14
Image 14
Hitachi 32LD9600 PREPARATION continued Safety Precaution on Main Unit Installation, Anti-Tumble Measures, English