Hitachi 32LD9600 FUNCTION continued, DVD Player / STB Selection, Set up hint, Set up the maker

FUNCTION (continued)	Recall
	button
DVD Player / STB Selection	Function Select
	button

You can use this remote control to operate DVD Player and Set Top Box of other makers as well as this set. After pressing button, press (or hold) the required buttons to select the maker and type as shown below.

Set up hint

Example: HITACHI DVD ②

1. Set up the maker.

Press button to indicate the DVD LED on the remote control. While the DVD

LED is blinking (Approx. 30 Seconds), press + and ① buttons.

2. Set up the maker type.

Release the ① button while keeping + button depressed. Then press ② button.

3.Confirm the setting.

After setting the maker and type, press the SUB POWER button on the remote control. If the DVD does not switch ON, repeat step 1 and 2 using other maker types as listed.

<“DVD” Selection>
Makers of DVD Player	Set Maker	Set type	Makers of DVD Player	Set Maker		Set type
HITACHI	+		RCA	+		+
FUNAI	+		Mitsubishi	+		+
Pioneer	+		ONKYO	+	RED	+
Panasonic	+		ZENITH	+	GREEN	+
TOSHIBA	+		THOMSON	+	YELLOW	+
Philips	+		SHINCO	+	BLUE	+
JVC	+		SKYWORTH	+		+
SAMSUNG	+		BUBUKO	+		+
Sony	+		DENON	+		+
Sharp	+		YAMAHA	+	?	+
	2-4-12

<“SAT” Selection>

Makers of STB Player Set Maker		Set type
HITACHI	+	+
TOSHIBA	+	+
DGTEC	+	+
Panasonic	+	+

NOTE

Please note that not all models of the listed makers can be operated using this remote control.

ENGLISH

69