SAFETY PRECAUTIONS

For your safety, please read the following precautions carefully before using this product. Improper use would cause serious personal injuries and/or damage to your property or this product.

Important For United Kingdom

IMPORTANT FOR UNITED KINGDOM

WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS

The mains lead on this equipment is supplied with a molded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA or BSI approved BS 1362 fuse must be used of the same rating. If the fuse cover is detachable never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug. Fuse covers are available from your dealer.

DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.

Should it be necessary to change the mains plugs, this must be carried out by a competent person, preferably a qualified electrician.

If there is no alternative to cutting off the mains plug, ensure that you dispose of it immediately, having first removed the fuse, to avoid a possible shock hazard by inadvertent connection to the mains supply.

WARNING: THIS EQUIPMENT MUST BE EARTHED

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code : Green and Yellow = Earth, Blue = Neutral, Brown = Live.

As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured GREEN and YELLOW must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol or coloured GREEN or GREEN and YELLOW.

The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.

Green & Yellow to Earth

Brown to Live

Fuse

Cord Clamp

Blue to Neutral

About the Symbols

The following are the symbols used in this manual and affixed on the unit itself. Please fully understand the meanings of the symbols before reading the instructions in this section.

WARNING

Never ignore the instruction. There are risks of serious injuries or possible death to the user.

 

 

CAUTION

Do not ignore the instruction. There are possibilities of personal injuries and/or property damage.

 

 

Other Symbols

The triangle with illustration is intended to alert the users that there are possibilities of fire, explosion, or high temperature if the product is handled improperly.

Each illustration within the triangle specifies the contents in detail. (The figure on the left is an example.)

The circle with diagonal line and illustration indicates a prohibited action (the symbol to the left indicates that disassembly is prohibited.)

This symbol indicates a compulsory action.

The contents will be clearly indicated in an illustration or nearby (the symbol to the left indicates that the power plug should be disconnected from the power outlet).

WARNING

There is a risk of fire, electric shock, or serious injury.

Unplug the power cord immediately when serious problems occur.

Serious problems such as

Smoke, abnormal odor or noise is emitted from the product.

No picture, no sound or distorted picture on the display.

Foreign objects (such as water, metals etc.) get inside the unit. Do not continue using the product under these abnormal conditions.

Turn off the Main Power, unplug the Power Cord, and contact your dealer immediately.

For your safety, never try to repair the product by yourself.

Disconnect the

plug from the power outlet.

4

Page 5
Image 5
Hitachi 37LD9700N, 32LD9700N, 32LD9700U, 37LD9700U Safety Precautions, Important For United Kingdom, About the Symbols