Hitachi 37LD9600 FUNCTION Power Swivel, English, Information, Swivel The Swivel Display, Slack

FUNCTION

Power Swivel

SWIVEL

With the Desktop stand, you can adjust the angle of the panel side to side by pressing button on the remote control.

1. Press	SWIVEL
	button on the remote control.

The Swivel Display (as shown in the figure on the right) will appear on the screen.

ENGLISH

2. Adjust the angle of the panel with	button while Swivel Display is on the
screen.

The unit will be able to rotate ±30 degrees to each side.

CAUTION

When you use the Power Swivel function, make sure that the Power Cord, cord or chain connected to the wall is loose enough to operate the Swivel function securely.

Do not put hands or face near the unit while operating the Swivel. It could cause personal injury. Beware especially when small children are around the unit.

SWIVEL button

Swivel

The Swivel Display

NOTE	Slack
If the stand cable is not connected to the unit, the message “Not Available”
will appear on the screen.	30°
The Swivel Display will automatically disappear when no operation has
	30°

been made for about 6 seconds.

CAUTION

Do not push the panel with your hands while operating the Swivel. It could damage the panel and/or stand.

Do not allow children to play or hang on the TV. These actions may tip it over, causing personal injury.

Do not swing the unit back and forth.

Do not place any fragile objects around the unit. The unit would hit the object(s) during the Swivel operation and could cause the breakage of the objects and/or the stand.

To operate the Swivel function correctly, place the unit on the stable surface.

When you use the unit as wall-mounting, disconnect the stand cable from the unit before installation.

Information

About Swivel terminal connection

To connect the Desktop stand to the unit.

Connect the designated stand cable to the Swivel terminal on the rear side of the unit.

To disconnect the stand from the unit.

Before detach the stand from the unit, make sure to disconnect the stand cable from the Swivel terminal on the rear side of the unit.

CAUTION

Turn Off the Main Power of the unit when connecting or disconnecting the stand cable to the unit.

51