–13 –EN
1L01
English
ANALOG
AUDIO OUT
RL
RL
Stereo system Dolby Digital decoder
DTS decoder
CONNECTION TO AN AUDIO SYSTEM
Optical cable (not supplied)
¡Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops
with a diameter of 15 cm or more when storing them.
¡Use a cable which is 3m or shorter.
¡Insert cable plugs firmly into the connectors when making connections.
¡If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.
Notes
¡If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to on for audio out-
put in the setup mode.
¡If output DTS audio, connect to a DTS decoder, and set DTS to ON for audio output in the setup mode.
¡Unless connected to a Dolby Digital decoder, or a DTS decoder, set Dolby Digital or DTS to off for audio out-
put in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also
damage the speakers.
¡The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound
by an MD or DATdeck.
¡
Set Dolby Digital and DTS to off for audio output in the setup mode. Playing a DVD using incorrect settings may
generate noise distortion, and may also damage the speakers.(See page 27 to set ON for Dolby Digital and DTS)
DIGITAL
AUDIO OUT
COAXIALOPTICAL
COAXIALOPTICAL

or

AUDIO
DVD
Method 1
Audio Input Jacks Digital Audio
Input Jacks
Analog Audio Out Digital Audio Out

Method 2

• Method 1 DVD Player + Stereo system
• Method 2 DVD Player + Dolby Digital decoder or DTS decoder
The following show examples of connections commonly used to connect the DVD player either TVand other
components.
Notes
¡Be sure to turn off the power to all components in the system before connecting another component.
¡Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the
DVD player.
E5610UD 2002.1.15 3:24 PM Page 13