English
1 Press the MENU button, choose “White Bal.” on the “Camera Functions Setup” menu screen, and then press the Abutton.
2 Choose the desired option, and then press the
Abutton.
3 Press the MENU button to end the setting.
Note:
•The white balance mode can be confirmed using the
•The white balance setting will be stored in memory even when the DVD video camera/recorder is turned off.
•Do not block the infrared sensor with hand, etc.
Infrared sensor block
•If a tele or
•Be sure to remove the lens cap before turning the DVD video camera/recorder on: If the DVD video camera/recorder is turned on with the lens capped, the white balance will not work normally.
●Setting white balance manually
1 Point the DVD | Thick paper |
video camera/ |
|
recorder at a white |
|
object so that it fills |
|
the screen. Use an |
|
object that is not |
|
transparent. |
|
If focus is not |
|
correct when the |
|
white object fills the screen, manually focus the object, referring to “Manually Focusing Subject” (see page 52).
2
3 Hold Apressed until the “h” indicator changes from blinking to a steady light. When the “h” indicator lights, the white balance setting will be complete.
4 Press the Cbutton to end the setting.
Note:
•The white balance set using the “Set” option will be stored in memory until it is
•Do not use a colored object when setting the white balance: The appropriate tint cannot be set.
•The setting on white balance “Set” may not be possible in a dark place. Also, the white balance cannot be set when the zoom bar is in the digital zoom range (p. 50). In such status, the “h” indicator will remain blinking. Set the white balance in a bright place with “Dig. Zoom Off” specified.
•If the recording conditions have changed,
•The setting will be stored in memory even when the DVD video camera/recorder is turned off: The “h” indicator will blink when the DVD video camera/ recorder is turned on next time.
58
