English

Note:

The 16:9 setting will be kept even after the DVD video camera/recorder is turned off.

When using a DVD-RW (VF-mode)/DVD-R/+RW:

You cannot specify the combination of “VIDEO Mode: STD” and “16:9 On”. If you specify “16:9 On” and try to switch the VIDEO Mode to STD from XTRA or FINE, the screen will automatically switch to the 4:3-aspect ratio display.

When using DVD-RW (VF-mode)/DVD-R, switching between wide mode (16:9) and normal mode (4:3) will not be possible while using the same disc.

Images recorded with “16:9 On” (aspect ratio 16:9) specified will be played back with the setting used during recording regardless of the 16:9 setting then being used.

To view images recorded at 16:9 setting, switch the aspect ratio of your TV: See TV instruction manual for this switching.

When using a video selector, the TV may not automatically be switched to 16:9 mode.

When the power switch is set to “N” or “P”, the aspect ratio of screen in recording pause will be 4:3 regardless of the setting on 16:9 wide mode.

If you connect the DVD video camera/recorder with a disc recorded in wide mode to a TV with 4:3 display only and play it back, vertically long images will appear. To display 4:3 images, set “TV type” (p. 103) to 4:3 and view the images.

If you play back a +RW recorded in wide mode on a DVD recorder/player, etc., vertically long images will appear even on a wide-screen TV. In this case, change the setting on the DVD recorder/player, or set “TV type” (p. 103) to 4:3 and view the images.

62

Page 62
Image 62
Hitachi DZ-GX5000A, DZ-GX5080A, DZ-GX5020A instruction manual English