Hitachi DZ-GX5020A Playing Back from Disc Navigation Screen, Adjusting Volume During Playback

Playback pause

PLAYING BACK FROM DISC NAVIGATION SCREEN

1 Press the DISC NAVIGATION button.

2 Use the f/e/d/cbuttons to select the desired scene.

The selected scene will be framed: This is called a “cursor”.

3 Press the Abutton.

Playback will start from the selected scene.

Note:

Pressing the dor cbutton will move the cursor to the preceding or following scene.

Pressing the for ebutton will move to preceding or following page.

English

ADJUSTING VOLUME DURING PLAYBACK

If the LCD monitor is open during playback of movie, playback sound will be heard from the speaker. Adjust the sound volume using the zoom lever. Tilt it to the “T” side to increase the volume, “W” side to reduce the volume.

VOLUME

Volume

●When playback ends

The DVD video camera/ recorder will enter the

playback pause status at the last image of last scene. Pressing the Cor DISC NAVIGATION button will restore the Disc Navigation screen.

When the playback pause status continues for as long as 5 minutes, the Disc Navigation screen will automatically be restored.

●Playing back photos

A photo on DVD-RAM disc will be displayed for approx. 3 seconds. When playing back photos on card, playback will stop after each photo playback.

Note:

•Press the Abutton to temporarily stop playback. Pressing Aagain will start from that point.

•If you press the Abutton after playback of the last scene on disc finishes, playback will start again from the beginning of disc.

•Pressing the Cbutton will always restore the Disc Navigation screen.

•When playing back photos on card, “Playback” will appear. In the case of a photo with a large number of pixels, it will take some time for the photo to appear.

67