Go To

m

From the Disc Navigation screen, you can jump to the first scene or last scene, and playback will start from that point.

MOVING TO BEGINNING

(END) OF HDD/DVD/CARD

 

I Press

the

DISC NAVIGATION

button.

3

Use the I,ql_/l_l/_l/_/l_'/

buttons to

 

 

 

 

 

choose "Top" or "End" on the "Go To" menu

2 Press

the

MENU button,

 

 

screen,

and then press

the 1_'/1 button.

 

 

 

 

4

Press

the 10../ button

to start playback.

HDD/DVD/Card Management

INITIALIZING HDD/DVD/CARD

Initializing the HDD, a DVD-RAM/DVD-RW/+RW o1:card _ill allow you to delete any recorded

contents. Before using a DVD-RW/+RW on this video camera/recordm_ you must format it.

Be sure to use the AC adapter/charger to power the DVD video camera/ recorder for initialization. If the DVD video camera/recorder is turned off

during initialization and the initialization is interrupted, incorrect

Before You Begin

initialization will result and the incorrectly initialized disc will be unusable.

If you use a brand-new DVD-RW/+RW, message "DVD is not formatted" will appear: Initialize the disc, following the subsequent messages

(p. 41).

1 Press the DISC NAVIGATION button.

2 Press the MENU button.

 

3 Use the I,ql_l/l_l/_/_/l_/

buttons to

choose "Format HDD', "Format DVD" or

"Format Card" on the "HDD Setting", "DVD

Setting" o1: "Card" menu

screen, and then

press the 1_'/1 button.

 

The screen for verifying "Format HDD', "Format DVD" or "Format Card" will appear.

4 Choose "YES", and then press the I_/ll button.

When using DVD-RW, a screen for prompting you to choose the VF o1:VR mode will appear.

Choose "NO" to cancel initialization.

Note:

If you wish to delete all recorded contents, it is recommended that you use initialization, which will

delete all the scenes in much less time than using the scene delete function.

Initialization will delete all the recorded contents on HDD, disc or card: Be careful not to delete data by mistake.

It may not be possible to initialize a disc with many scratches or dirt: Such a disc cannot be used (p. 10).

This DVD video camera/recorder may not recognize some discs or cards that have been initialized on PC or a device other than this DVD video camera/ recorder.

If you attempt to initialize a disc or card in this DVD video camera/recorder when it is connected to PC via

PC connection cable, the disc or card may not be initialized and may be unusable on this DVD video camera/recorder.

If you choose the VR mode when initializing a finalized DVD-RW (VR-mode), the finalization will not

be released. (The DVD-RW will be a finalized disc without any recorded data, and recording will be possible on it.)

Choosing the VF mode will release the finalization of the disc.

105

Page 105
Image 105
Hitachi DZ-HS3OOA HDD/DVD/Card Management, 105, Moving to Beginning END of HDD/DVD/CARD, Initializing HDD/DVD/CARD