Hitachi DZ-HS3OOA instruction manual 145, Ntsc, Pal, Unformat DVD Unformat HDD, Hdd/Dvd

This DVD cannot be

used. Please replace DVD.

This DVD is finalized. Finalize is not required.

A disc that cannot be used on this DVD video camera/recorder has been loaded. Check the type of disc.

This message will appear if you press the FINALIZE button with a

finalized DVD-RW/DVD-R/+RW loaded in this DVD video camera/ recorder. Finalizing the disc is not necessary.

27

108

This DVD is recorded by		This	DVD	video camera/recorder		can use	only	discs	recorded	on
the PAL	system. Please	the	NTSC	system.	A disc recorded	on the	PAL	system	cannot	be
replace	DVD.	used	on this DVD		video camera/recorder.

UNFORMAT DVD

UNFORMAT HDD

The disc is not initialized or it is damaged.

If this message appears, be sure to initialize the disc on this DVD

video camera/recorder before using it.

Reinitializing even a disc used on this DVD video camera/ recorder may be necessary (initializing will erase all recorded contents on disc). If this message appears, try to initialize the disc. If the same message still appears, the disc may be damaged: Use another disc.

See *2 on this page.

The HDD may not be initialized, or it may be destroyed.

1O5

11

Use AC

adapter/

No

dubbing,

HDD deletion,

or disc finalization

is possible

with a

charger,

battery:

Use

the

AC

adapter/charger.

Use AC

adapter/

Scene

cannot

be repaired

when

the DVD video

camera/recorder

charger,

is powered

by

a battery.

Turn

off

power.

If the AC

adapter/charger

is

unavailable

in handy

place,

remove

the disc, use the opposite side, or use another disc. To repair the

removed disc, insert the disc into the DVD video camera/recorder

afterwards,

and

connect

the

AC

adapter/charger.

Write

protected.

A card

with

the

erase

prevention

switch

locked

is

inserted:

Unlock

Check

card.

the

switch.

Write

protected.

The

HDD

or disc

is write-protected.

Use

the Disc

Navigation

Check

HDD/DVD.

menu

to

release

the

protection.

*]

28, 83, 107, 108

28

27

106

recognized immeidiately after it is inserted, do not repair the disc; remove it and then use the provided disc cleaning cloth to clean off the dirt before using it.

This message may also appear when COTw/ensation occurs, in this case do not repair the disc; turT_ the DVD video

i his message ma_, also appear when dirt adheres to disc. If this message appears when a recorded disc is

camera/recorder'off, wait until it dries out, and then turn it on again.

If the repair message appears when you turn the DVD video camera/recorder on from off with a disc loaded after recording on it, cl_6ose repair.

• lfthe repair messageap_earswhen recording and pla_,back are normally possible with aT_other disc- aTW/no

condensation occurs aT_d,the disc is not dirty - choose_repair.

*2

i thenhis messageuse the promay idedalso discappearcleaningwhen clothdirt toadheresclean tooffdiscthe. dirtIn thisbeforecase,usingdo notit. initialize the disc: Remove it and

This message ma_, also appear when condensation occurs. In this case, do not initialize the disc; turn the DVD

_ideo camera/recorder of,, wait until it dries out, and then turn it on again.

•Initialization will delete all data on disc.

*3

This message ma} also a),?pear when dirt adheres to disc. Remove the disc and then use the provided disc

i cleaning ck)th to clean offthe dirt before using it.

This message may also appear when condensation occurs. Wait until the DVD vide() camera/recorder dries out,

and then turn it on again.

*4

•	This message will appear when a single-sided	disc is inserted	in reverse.	Reinsert	the disc correctly: (Insert	the
*5	disc with the label printed surface facing the outside.)
•	Do notinsertaDVD-RW(VF-mode)/DVD-Rthat	hasnotbeen	finalized	into any	DVD recorder: The disc	may be
	unusable.

145