Trouble Messages

A message may appear while you are operating the DVD video camera/recorder. Ifa message appears, refer to the following table and take appropriate corrective action.

Messages are arranged in alphabetical order.

(1)Data error in a part of image file. Repair data now?

(2)Found error in image file. Repair data now?

(3)Data error in all image file. Repair all data now?

(1)DVD is not formatted. Format the DVD now?

(2)DVD Format. Select record format.

(Displayed only when DVD-RW is used.)

It is possible that the system cannot normally complete writing of file when power is turned off for some reason during recording or editing (deleting, dividing or combining scenes, or creating play list). Selecting "YES" will automatically repair the video file, but even if "NO" is selected, the same message will appear when the DVD video camera/recorder is turned on next time. (Do not remove the disc while the DVD video camera/recorder is recognizing it: Ignoring this will deactivate the file repair function.) Follow the instructions on screen, taking note of the following cautions:

Be sure to use the AC adapter/charger to power the DVD video camera/recorder when repairing data: Repair is not possible using a battery. If a battery has been attached, turn the power switch off once, connect the AC adapter/charger, and then start repairing.

If message (1) appears when using the HDD, a battery can be used for repair (except when the remaining battery level indicator is blinking).

Repair will normally be complete in several minutes, but it may take longer (up to one hour).

Data may not be repaired, depending on the timing when power was turned off.

Data may not be repaired normally if data recorded on another recorder is mixed in.

The repaired data may be different from the original recorded content because of partial deletion of defective portion.

Since the date/time for repair is added to the repaired data (only the corrected portion for partial repair), the original date/ time information will be lost.

Since all movies, and then all stills, are repaired, the order of recorded contents will be lost in case of message (2) (3) only.

See "1 on page 145.

A DVD-RW/+RW that was initialized by PC and not initialized for camera use is inserted.

Auto finalizing...

Plaese wait...

Cannot combine scene.

This message

will

appear with

a +RW

when

it is removed after

 

recording,

or

the

last recorded

scene

was deleted. The auto-

114

finalized

+RW

can be played back on

a DVD

recorder/player.

 

Unless consecutive scenes are selected, they cannot be

 

combined.

 

 

 

 

 

 

87

139

Page 139
Image 139
Hitachi DZ-HS3OOA instruction manual Trouble Messages, 139, +Rw