Hitachi DZ-HS3OOA Resetting Menu Settings to Defaults Reset, Changing Setting of Demonstration

RESETTING MENU SETTINGS TO DEFAULTS (RESET)

You can restore menu settings to defaults (initial settings at the factory (p. 153)). (Note, howevel, that

the date/time will not be reset.)

1 Choose "Reset" on the

"Initial Setup" menu

screen, and then press the I_/11 button.

The screen for verifying reset will appeal_

2 If you are sure that you wish to reset, use the

button to choose

"YES", and thon press the I_/ button.

The setting items have now be_n reset to defaults.

Note:

To cancel resetting midway, choose "NO" on the screen for verification in step 2 or press the • button.

TURNING RECORD LED ON OR OFF (RECORD LED)

You can switch off the recording indicator on the front of DVD video canrera/recorder even during

recording.

Select "On" or "Off", and then press the l,/ii button. On: The recording

indicator will light red to show that the

DVD video camera/recorder is recording. Off: The recording indicator _xill not light even

during recording.

Note."

•The Record LED setting will not appear in the on- screen information display.

•The Record LED setting will be stored in memory even when the DVD video camera/recorder is turned

off.

•Specify "Record LED: Off" when recording a subject

behind a glass or water tank that reflects light: The reflected light of the recording indicator will not be recorded.

•Even if "Record LED: Off" is specified, the recording indicator will light while the self-timer is counting down,

CHANGING SETTING OF DEMONSTRATION

Choose the desired option using the screen on the

right, and then press the I1_/ button.

Auto:	To start	demonstration		if the DVD
	video can-_era/recorder			connected	to
	AC adapter/charger			is inactive	for
	approx. 10 minutes		or more after it is
	turned	on.
Off:	To set	demonstration		to off.
Start:	To start	demonstration		immediatel_

Note:

•If "Auto" is specified, the demonstration will not start if a battery is connected.

•Pressing the • (STOP/EXIT) or DISC NAVIGATION button will exit demonstration.

•If "Auto" is specified the demonstration will not start when the power switch on this DVD video camera/ recorder is set to "DVD" and a DVD is loaded, or when the power switch is set to "SD" and a card is loaded,

•The demonstration function will not work when the DVD video camera/recorder is connected to PC.

•While the demonstration is being given the recording indicator will blink,

37