Hitachi DZ-HS3OOA ACCESS/PC Or Card, Indicator Is lit or blinking, Card Access indicator

Do not turn the DVD video camera/recorder off while the ACCESS/PC indicator or CARD ACCESS indicator is lit or blinking:

• The ACCESS/PC

or CARD

ACCESS

indicator

is lit or

ACCESS/PC

blinking

to show

that

data

is

being,,-written

to disc

or card,

indicator

\ _

_--x_

or being

read

from

it.

At this

time,

do

not

do

any

of the

following,

so

as not

to

damage

the

data:

Remove

batterv

-Disconnect AC adapter/charger

-Plug o1:unplug PC connection cable Remove disc or card

-Subject DVD video camera/recorder to severe

vibrations or impact

Violently open or close the LCD monitor

The ACCESS/PC indicator will light for a while after recording is finished. While it is lit, do not subject the DVD

video camera/recorder			to	any vibration		or impact,		and do
not disconnect the battery or AC adapter/charger.
If you turn	the DVD		video	camera/recorder			off while the
ACCESS/PC	or	CARD ACCESS			indicator	is lit or blinking,			CARD ACCESS indicator
turn it on again		with	the disc or card loaded				in it: Repair		of
the disc or card will			be executed		automatically		(see	page	139).

Do not wipe the DVD video camera/recorder case with benzene or thinner:

•The coating of case couht peel off or the case surface could deteriorate.

•When using a chemical cleaning cloth, follow the instructions.

Also read the instructions attached with optional accessories:

• For optional accessories, observe the cautions and follow instruction manuals attached.

The battery provided has not been charged at time of purchase:

•Charge it before using the DVD video camera/recorder (see page 29).

•The battery will discharge as time passes. (The battery is produced so that it discharges on its own in order to protect its characteristics.)

Disc cannot be inserted or removed unless a charged battery or AC adapter/ charger is connected to the DVD video camera/recorder.

Be sure to set the power switch to "OFF" when turning the DVD video camera/ recorder off:

•Disconnecting the battery or AC adapter/charger while the DVD video camera/recorder is being powered could cause a fault.

8