Hitachi DZ-HS3OOA instruction manual 113, Viewing on TV Screen

VIEWING ON TV SCREEN

1 Turn the TV on and set the input selector to

"VCR" whichever applicable Video input.

Refer to the TV instruction manual for how to switch the TV input.

2 Turn the DVD video camera/recorder on.

The image that the DVD video camera/ recorder is seeing will appear on the TV screen.

You can also monitor the image on the LCD

screen or viewfinder of the DVD video camera/recorder.

3 Perform playback, recording or editing.

You can perform playback, editing or editing

on Disc Navigation while checking on TV screen.

Note:

•Adjust the volume of sound on TV,

•The infrared remote control is useful when operating the DVD video camera/recorder while viewing an image on TV screen. However, if you use a Hitachi

VCR, the remote control may inadvertently operate the VCR if it is near the DVD video camera/recorder,

To prevent this set the remote control code of the VCR to a position other than "VCR2",

•Information during recording and playback will appear on the TV screen: You can also switch off the display during recording. Refer to "SETTING ON-SCREENDISPLAY OUTPUT ON OR OFF (OSD OUTPUT)" on page 69,

•When copy-guarded disc is played back, no image will appear on TV screen,

•If you use TV with wide mode (aspect ratio 16:9) and set the TV to the wide mode, the entire Disc Navigation display may not be displayed on the TV screen. If this happens, release the wide mode setting on TV (see the TV instruction manual for releasing the wide mode),

113