Hitachi DZ-HS3OOA instruction manual 132, Using Pixe VRF Browser EX and Imagemixer VCD/DVD2

[When using Macintosh]

USING PIXE VRF BROWSER EX AND IMAGEMIXER VCD/DVD2

Pixe VRF Browser EX allo_x s you to import the images on DVD-RAM/DVD-RW/DVD-R recorded

on the DVD video camera/recorder into PC as an MPEG file. ImageMixer VCD/DVD2 allows you to use the images imported by Pixe VRF Browser EX to create a DVD-Video (DVD-RW/DVD-R).

The following shows the basic operations of Pixe VRF Browser EX and hnageMixer VCD/DVD2.

Refer to the electronic instruction manuals that can be read on PC for detailed instructions of Pixe

VRF Bronx ser EX and ImageMixer VCD/DVD2. See the electronic instruction manuals for the detailed use method of each software program.

For Pixe VRF Browser EX, click "Help" - "Pixe VRF Browser EX Help" while it is being started up.

For ImageMixer	VCD/DVD2,		click	the question	? mark	at the top right	of	the	folder	select screen.
To start Pixe VRF Browser		EX and		hnageMixer	VCD/DVD2, double-click the				"Pixe	VRF	Browser EX
for DVDCAM"	icon and	"ImageMixerVCD/DVD2"			icon	in Macintosh	HD	(startup		disk)	-
"Applications"	- "hnageMixer		for DVDCAM'.

Note:

• The provided software cannot be used to burn a DVD-VR (DVD-RAM/DVD-RW):It is also incompatiblewith a +RW.

IMPORTING IMAGES RECORDED ON DVD-RAM/DVD-RW/DVD-R INTO PC

TO CREATE A DVD-VIDEO (DVD-RW/DVD-R)

You can use the images recorded on the DVD video camera/recorder to create a disc that can be viewed on DVD recorders/players.

*Any DVD-RW/DVD-R recorded on this DVD video camera/recorder must be finalized (see page 108).

1 Connect this DVD video camera/recorder to

the USB port of PC.

To save images recorded on a disc, first insert the disc you wish to save into the DVD video

camera/recordel; and then connect the DVD

video camera/recorder to the USB port of PC.

2 Start Pixe VRF Browser EX and choose the drive.

Clicking the "Drive" icon will display the drive select screen. Choose "HITACHI DZ-

USBHDD" when the power switch is set to "HDD', "Hitachi DVD-RAM DZ-GBX3" when it is set to "DVD', and then click "OK". If you wish to change the import device, and continue import, unplug the PC connection cable from the PC, and then change over the power switch (see page 123).

Click_lr

_Click

132