SELECTING SCENES RECORDED ON HDD AND DUBBING THEM (SCENE SELECT DUBBING)

You can select desired scenes recorded on HDD and

4

l Press the DISC NAVIGATION button, and

then the MENU button.

2 Choose "Scene", "Dubbing", "Select", and then press the I_/1 button.

"Please insert DVD." _xill appear on the screen: Press the DISC EJECT button and insert a disc.

3Place the cursor on a scene to be dubbed, and

then press the I_/1 or PHOTO/SELECT

button: The cursor of the selected scene will

change to red (see p. 79), and the scene with red cursor will be dubbed to a disc.

If you wish to dub

other scenes, place the cursor on a scene in the

same wa_, and press tire _'/11 or PHOTO/ SELECT button to select it.

To cancel a selected scene, press the _'/11 or

PHOTO/SELECT button again. To cancel all selected scenes, press • (STOP/EXIT).

If the total capacity size of tile selected scenes

exceeds the remaining free space on disc, the remaining bar at the top right of screen will be red, and a message will appear. Select the scenes again.

4Press the DUBBING button.

"Dubbing scenes to DVD?" will appeal:

Instead of pressing the DUBBING button, you can press the MENU button, choose "Edit", and then "Enter": The same screen will appeal:

Choosing "YES" will start dubbing.

To cancel dubbing, choose "NO" or press • (STOP/EXIT).

5When dubbing is finished, check the "Delete Scene" screen.

Choosing "YES" will delete the dubbed scenes from the HDD.

To retain the dubbed scenes on the HDD, choose "NO".

dub only those scenes on discs.

Note:

The scenes on HDD will be dubbed to disc in the

order of display on HDD Disc Navigation screen, To dub the scenes in a different order, create a play list on which scenes are registered in the desired order of dubbing (see p, 98), and then execute dubbing.

If a finalized disc or a heavily scratched or dirty disc is inserted into this DVD video camera/recorder, a

message will appear and dubbing will not be possible: Use another disc,

A DVD-RW/DVD-R dubbed on this DVD video camera/recorder will not be finalized: To play it back on a DVD recorder, be sure to finalize it on this DVD video camera/recorder,

The details of editing scenes on HDD (fade, skip, change of thumbnail etc,) will not be reflected in the scenes if they are dubbed on a DVD-RW (VF-mode)/ DVD-R/+RW.

The maximum number of scenes and programs that can be dubbed will vary depending on the disc used.

If you combine scenes with different recording dates on a play list, and dub the combined scene to a DVD- RAM/DVD-RW (VR-mode), the scenes will be dubbed separately for each date. However, if a combined scene is subsequently divided, the scenes may not be dubbed separately for each date,

If you dub scenes combined using the Disc Navigation function to a DVD-RW (VF-mode)/DVD-R/ +RW, the two scenes immediately before the

combination (sometimes more than two scenes) will be dubbed,

If you divide a scene using the Disc Navigation function, and then dub both the divided scenes to a

DVD-RW (VF-mode)/DVD-R/+RW, the scene before the division will be dubbed.

The time shown on dubbing is for reference: Dubbing will be performed at normal speed in XTRA mode;

approx, 1,5 times the normal in FINE mode; approx. 2 times the normal in STD mode.

If the number of scenes on HDD is too large, or the temperature of this DVD video camera/recorder is too high, the required recording time may be longer than the display time on screen.

Please note in advance that Hitachi will not accept any responsibility for compensation or loss of data, or direct or indirect damage when dubbing is not performed normally due to a fault in this DVD video camera/recorder,

!1:}Press the DISC EJECT button to remove the

disc.

Close the cover of disc insertion block.

Press • (STOP/EXIT) to end dubbing.

84

Page 84
Image 84
Hitachi DZ-HS3OOA instruction manual Dub only those scenes on discs