Hitachi DZ-HS3OOA instruction manual Inserting and Removing, Disc

Inserting and Removing

1 Set the power switch to "DVD" or "OFF" .

When the power swik'h is set to "HDD" or "SD', the cover of disc insertion block will not open. When "Please insert DVD." appears during dubbing, however; the cover of disc insertion block will open even when the power s_ itch is set to "HDD" (see p. 83, 84).

Press down the DISC EJECT button once and release it.

A few moments after the ACCESS/PC indicator blinks, the cover of disc insertion block will open.

3 Gently open the cover by hand fully until it stops.

4 When inserting a disc:

Push the disc against the turntable at the center to lock it until a click is heard.

Push the shaded

portion.

Disc

When removing the disc:

While pushing down the center portion of

turntable, pick up the disc, holding its edge,

to remove it.

Turntable

Pickup lens

•Note that the recording surface of disc must face the inside of DVD video camera/recorder. When

using a single-sided disc, the recording surface is the side without label.

•Never touch the disc recording surface or pickup lens. Touching the pickup lens could cause a fault.

•Use the disc cleaning cloth provided to wipe off any dirt adhering to the disc recording surface.

•Do not use a dirtied or scratched disc.

5 Push the section marked "PUSH CLOSE" on the cover of disc insertion block, to close the cover.

Then the DVD video camera/recorder will

automatically recognize the disc: While the

ACCESS/PC indicator is lit, do not cut off the power supply, and do not subject the DVD

video camera/recorder to any vibrations or impact.

40