Hitachi DZ-HS3OOA instruction manual Zooming, Macro Recording

Zooming

If you continue to hold the zoom lever on the "T" control side with Dig. Zoom specified, the digital zoom will be activated midway (when optical 10-power is exceeded on DZ-HS303A or optical 25-power is exceeded on DZ-HS300A). You can zoom up to 500-power on DZ-HS303A; up to 1200-power on DZ-HS300A.

W:recording wide area (wide-angle)

ged

image (telephoto)

1 Press the MENU button, choose "Dig. Zoom" on the "Camera Functions Setup" menu

screen, and then press the)"/ button.

2 Choose the desired magnification, and then press the 11../ button.

3 Press the MENU button to end the setting.

Moving the zoom lever will display the

digital zoom bar.

Note:

•The digital zoom setting will be stored in memory even if the DVD video camera/recorder is turned off.

•You can also use the DIGITAL ZOOM button on remote control to switch the digital zoom setting: Pressing the button during movie recording will switch the setting between "Off", "40x ''.1,and "500x"'2; Pressing the button during photo recording will switch between "Off" and "40x ''.1.

•If you set zoom to "500x ''.when2 recording photo, the digital zoom will be up to 40x .1.

•When a subject is zoomed, it may be momentarily out of focus.

•When digital zoom is engaged, the image quality will be rougher.

"1 "lOOx" on DZ-HS3OOA. *2 "1200x" on DZ-HS3OOA.

MACRO RECORDING

Use the macro function when recording a small object from close-up position: You can shoot the

subject as close as approximately 13/16" (2 cm) from the lens surface, magnifying the image to fill the screen.

1 Aim the DVD video camera/recorder at the

subject, and press the zoom lever to "W" control side.

Note:

•Zoom can be used, but the subject may not be focused, depending on the distance to the subject. In this case, move the zoom to "W" control side to focus.

•The amount of light tends to be insufficient during macro recording: If the subject image is too dark, use additional lighting.

53