Hitachi DZ-HS3OOA instruction manual 131

7 Click "Authoring"

and create

a

DVD-Video

FrienD.

Clicking

"Authoring"

will

display

the

editing

screen

of DVD-Video

menu.

The

video

file

previously

imported

into

PC will

appear

in

"Source".

Choose

the

desired

video

file,

and

click

"Add titles": The video file will be registered.

When

using a video

file

imported

into

PC

using

[mageMixer

3,

click

"File"

to choose

the

folder

in

which

the

video

file

will be

stored.

Click

Clicking "Thenre" or "Set title menu" will allow you to change the design of DVD-Video lmenll.

Choose tile type of disc to be created (8 cm/ 12 cm/2-1ayer) using [Set] - [Configuration].

8Click "Write" to create a DVD-Video. Clicking "Write" will display the screen for writing.

Check "Create disc", perform setting for

write, such as choosing DVD write drive, and

then set a blank DVD-RW/DVD-R into the drive.

Clicking "Preview" will allow you to check any image of DVD to be created.

Click

Click

Click the "Write" button: The screen for

setting write will appear. After checking the settings, click "OK": Writing will start.

When _xrite is complete, the drive will open to eject the DVD: Creation of an original DVD is now finished.

Note:

•If you load a written DVD-RW in the write drive, the dialog "Are you sure you want to delete the content of disc?" will appear.

Deleting the content of disc will erase all data on the disc: Carefully check the contents of disc.

Choosing "Yes" will display the screen for choosing the disc erasure method: After checking it, click the "OK" button. Once the contents on disc have been deleted, the cover of disc insertion block on DVD video camera/recorder will open. Close the cover following the message instruction.

•If the disc contains a video file that does not conform to DVD-Video format, the video will be re-encoded, resulting in deterioration of image quality.

•If you execute "File" - "Save project", the halfway operation status can be saved as a project file. Reading in this saved project file will allow you to restart the operation from the saved status.

•A project file will be saved in the project folder that was set in step 4 on page 129, and the file name will be automatically attached.

•If a video recorded on the HDD in this DVD video

camera/recorder for extended hours is too long for one disc, cut-edit the video so that it can be recorded on one disc. See the on-line instruction manual of

ImageMixer 3 for cut-editing of videos. To display the ImageMixer 3 manual, choose "Help", and then

"Image Mixer Help (F1)", while ImageMixer 3 is being executed.

•Since a menu is always added to a recorded video, the data size of the created video will be larger than that of the original video.

131