Hitachi DZ-HS3OOA 152, Indicator on this DVD, Video camera, Recorder remains lit or

Disc cover cannot be	Is disc correctly		inserted?
closed.	Was disc	inserted		from	wrong	direction?		40
	Remove	the disc and then reinsert					it.
	Connect	a fully	charged		battery	or	AC adapter/charger,	and then
	turn the	DVD video		camera/recorder			on.	28, 30

Operating sound is heard cyclically.

Some vibrations are felt

or slight sound is heard from mechanism.

• No operation can be

performed because

the ACCESS/PC or

CARD ACCESS

indicator on this DVD

video camera/

This sound is heard because the disc is cyclically operated and does not indicate a fault.

These vibrations or sound are caused by HDD/disc drive: This does not indicate a fault.

In the following cases, it will take more time than usual until operation is possible:

•Immediately after a disc or card is reinserted.

•When a long time has elapsed since the DVD video camera/ recorder was turned off last.

•When the temperature is greatly different from the status of

recorder remains lit or

previous recording.

8, 40

blinking.
• After disc or card is
inserted,	it takes
some time until
recording	is possible.

No image in viewfinder.

•When disc with scratches, dirt or fingerprints is inserted.

•When disc is subject to severe vibrations.

•When the battery or DC power cord was disconnected instead of following the correct procedure using power switch to turn

the DVD video camera/recorder off.

•Is LCD monitor open?

No image will appear in viewfinder unless the LCD monitor is closed and securely locked to DVD video camera/recorder.

• Is the	DVD	video camera/recorder		set	to the	sleep/restart	34, 45
status?
Press	the	SLEEP/RESTART	button	to	release	the sleep/restart
status.

No image appears on the LCD screen or in

the viewfinder.

•Is DVD video camera/recorder connected to PC using PC connection cable?

Unplug the PC connection cable.

•Does DVD video camera/recorder stop at the end of the scene

to which wipe-out was set and played back?	45,88,123
Press the DISC NAVIGATION button.

•Is the DVD video camera/recorder set to the sleep/restart status?

Press the SLEEP/RESTART button to release the sleep/restart status.

152