Turning DVD Video Camera/Recorder On and Off

While holding down the gray button at the right of power s_x itch, set the switch according to each recording function:

Set to "OFF":

The DVD video camera/ recorder _xil] turn off

Set to "SD":

To record photos oil an SD nremory card and play them back

Note:

Once you turn the DVD video camera/recorder on to let it recognize the disc, you can immediately record or play back by turning the DVD video camera/ recorder on again. However, if a long time has elapsed after the disc was inserted, it will take some time for the DVD video camera/recorder to start

because it must recognize the disc again (see "Troubleshooting" on page 146).

It will take some time for the DVD video camera/ recorder to display the Disc Navigation screen after power is turned on.

When the DVD video camera/recorder is turned on, the self-diagnosis function will work and a message

Set to "HDD":

may appear. In this case, refer to "Trouble Messages" on page 139 and take corrective action.

To record or dub movie on HDD and play it back

Set to "DVD":

To record movie on DVD-

RAM / DVD-RW/DVD-R /+RW and play it back

When turning the DVD video camera/recorder off or changing over the power switch between "HDD" and "DVD", you will not need to hold down the gray button: Simply move the power switch.

Power switch

33

Page 33
Image 33
Hitachi DZ-HS3OOA instruction manual Set to OFF, Set to SD, Set to HDD, Set to DVD