Operating
Adjusting the position
Press the POSITION button on the remote control. |
|
|
1. The “POSITION” indication will appear on the screen. |
| - ZOOM + |
- | MENU | |
| POSITION |
Use the cursor buttons ▲/▼/◄/► to adjust the picture | ENTER |
| |
2. position. |
|
When you want to reset the operation, press the RESET button on the remote control during the operation. To complete this operation, press the POSITION button again. Even if you do not do anything, the dialog will automatically disappear after a few seconds.
●When this function is performed for a video signal, a certain extra such as a line may appear outside a picture.
ENGLISH
Correcting the keystone distortions
1.
2.
Press the KEYSTONE button on the remote control. | ON |
|
| MAGNIFY | VOLUME |
A dialog will appear on the screen to aid you in correcting |
| MUTE |
the distortion. | OFF |
|
- + |
| |
| FREEZE | KEYSTONE |
Use the cursor buttons ▲/▼ to correct the distortion. To close the dialog and complete this operation, press
the KEYSTONE button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.
●The adjustable range for correction will vary among inputs. For some signals, this function may not work well.
●While setting the WIDE mode for aspect ratio, the correction of keystone distortion is not effective. (23, 36)
25
