Multifunctional settings
With the IMAGE menu, the items shown in the table below can be performed.
Choose an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.
MENU [RGB] |
| :SELECT |
PICTURE | ASPECT | 4:3 |
IMAGE | OVER SCAN | 5 |
INPUT | V POSITION | 25 |
SETUP | H POSITION | 142 |
SCREEN | H PHASE | 16 |
OPTION | H SIZE | 1344 |
EASY MENU | AUTO ADJUST EXECUTE |
Item
Description
ASPECT
Using the buttons ▲/▼ switches the mode for aspect ratio.
For a 16:9 signal
4:3 | 16:9 | WIDE | MOVIE1 | MOVIE2 |
For a 4:3 signal
4:3 | 16:9 | WIDE | MOVIE1 | MOVIE2 |
For an RGB signal
4:3 16:9 NORMAL
For a video signal,
For no signal 4:3 16:9
•The NORMAL mode keeps the original aspect ratio of the signal.
•For an HDTV component video signal of 1125i (1080i) or 750p (720p), this item cannot be chosen.
•Performing the automatic adjustment initializes the aspect ratio setting.
•While setting the WIDE mode, the correction of keystone distortion is not effective. (25, 40)
•Setting the WIDE mode may limit the magnify range. (26)
36