Using the partial magnify feature | Hitachi EDPJ32 instruction

Operating

Using the partial magnify feature

Press the ON button of MAGNIFY on the remote control.
1. The “MAGNIFY” indication will appear on the screen		ASPECT	AUTO BLANK
1. The “MAGNIFY” indication will appear on the screen		ON MAGNIFY	VOLUME
(although the indication will disappear after several			MUTE
seconds with no operation), and the projector will enter	- +	OFF
seconds with no operation), and the projector will enter		FREEZE	KEYSTONE
the MAGNIFY mode.

2. Use the cursor buttons ▲/▼ to adjust the zoom level.

To move the zoom area, press the POSITION button in the MAGNIFY mode, then use the cursor buttons ▲/▼/◄/►. And to ﬁnalize the zoom area, press the POSITION button again.

To exit the MAGNIFY mode and restore the screen to normal, press the OFF button of MAGNIFY on the remote control.

●The projector automatically exits the MAGNIFY mode when the input signal is changed, or when the display condition is changed (automatic adjustment, etc. is executed.)

●Although the keystone distortion condition may vary in the MAGNIFY mode, it will be restored when the projector exits the MAGNIFY mode.

●Setting the WIDE mode may limit the magnify range. (23, 36)

Freezing the screen

Press the FREEZE button on the remote control.	ON
1. The “FREEZE” indication will appear on the screen, and	MAGNIFY	VOLUME
		VOLUME
	OFF	MUTE
the projector will enter the FREEZE mode.	FREEZE	KEYSTONE
To exit the FREEZE mode and restore the screen to	- +
To exit the FREEZE mode and restore the screen to		- ZOOM +
normal, press the FREEZE button again.

●The projector automatically exits the FREEZE mode when the input signal is changed, or when one of the projector’s buttons or the remote control buttons of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, ASPECT, VOLUME, MUTE, KEYSTONE, POSITION and MENU is pressed.

●If the projector continues projecting a still image for long time, the LCD panel might possibly be printed. Do not leave the projector in the FREEZE mode for too long.

26

Image 26

Hitachi EDPJ32 user manual Using the partial magnify feature, Freezing the screen

Contents

EDPJ32 Thank you for purchasing this projectorTrademark acknowledgment User’s Manual - Operating Guide Before use ContentPower on/off Preparations Troubleshooting Multifunctional settingsMaintenance Warranty and after-service About this manual Projector featuresBefore use About contents of package 47, 48 Part namesProjector Remote control Control buttons Preparations Fastening the lens cover Filter cover’s knob Filter cover for bottom-up use with an air ﬁlter About the ﬁlter cover bottom-up useTabs When put on a table When suspended from the ceiling Arrangement For 169 screens For 43 screens Elevator button Adjusting the projector’s elevatorElevator feet Connecting your devices Examples of connection with a VCR/DVD player Examples of connection with a computer Example of computer signal About Plug-and-Play capability Connecting power supply Loading batteries into the remote control Using the remote control Power on/off Turning on the power Turning off the power Temporarily muting the sound Adjusting the volumeOperating POWER INPUT Selecting an input signalSearching an input signal  For no signal 43  For a 169 signalFor a 43 signal Selecting an aspect ratio Using the automatic adjustment feature Adjusting the zoom magnifying powerAdjusting the focus  For an RGB signal Adjusting the position Correcting the keystone distortions Using the partial magnify feature Freezing the screen Temporarily blanking the screen 1. To display a menu Multifunctional settingsUsing the menu function 2. To choose the target menu 3 Advanced MENU → EASY MENU 3. To choose the target item2 Advanced MENU → One of Advanced menus ex. SETUP menu 1 In the EASY MENU ex. KEYSTONE 5. To return to the previous menu 6. To reset4. To operate 7. To close the menu EASY MENU EASY MENU continued Using a test pattern PICTURE menuTo adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM GAIN adjustments mainly affect color intensity on PICTURE menu continuedTo adjust CUSTOM Using the buttons / switches the progress mode IMAGE menu at the frame area of the picture. In such a case, please adjust small IMAGE menu continuedWhen this adjustment is too large, certain degradation may appear Choosing this item performs the automatic adjustment feature INPUT menu SETUP menu MIRROR item in the SETUP menu, if the projector screen is inclined SCREEN menu the frame may not move for some signals. To restore the screen SCREEN menu continuedAlthough the adjustable range will vary depending on inputs, and MyScreen Lock MESSAGE blinking. Please refer to the section “Turning off the power”.  OPTION menuautomatically. When the time is set to 1 to 99, and when the passed OPTION menu continued continued press the ENTER button on the remote control or the INPUT buttonyou to clean “REMINDER...” will appear after the timer reaches the 50h  100h  200h  300h  TURN OFF Maintenance Lamp In the case of replacement by yourself Type number = DT00707 1 Press the MENU button to display a menu Usual ﬁlter cover Air ﬁlterType number = NJ22642 Filter cover for bottom-up use Filter cover for bottom-up use Caring for the lens Caring for the cabinet and remote controlInside of the projector A note of precaution when cleaning the air ﬁlter TroubleshootingThere is no input signal Related messages The projector is in a standby state Regarding the indicator lampsThe projector is cooling down. A certain error The projector is in an on state Regarding the indicator lamps continued Phenomena that may easily be taken as machine defects If the situation cannot be corrected Perform picture adjustments by changing the COLOR TEMP, COLOR Warranty and after-service Speciﬁcations Speciﬁcations Dimension diagram202 285 33.5