Hitachi EDPJ32 user manual Easy Menu

Multifunctional settings

EASY MENU

With the EASY MENU, the items shown in the table below can be performed.

Choose an item using the cursor buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table.

EASY MENU

ASPECT	4:3
ZOOM	+0
KEYSTONE	+0
MODE	NORMAL
BRIGHT	+0
CONTRAST	+0
COLOR	+0
TINT	+0
SHARPNESS	+3
WHISPER	NORMAL
MIRROR	NORMAL
RESET	EXECUTE
FILTER TIME	0h
LANGUAGE	ENGLISH

ENGLISH

Go To Advance Menu...

Item	Description
ASPECT	Using the buttons ◄/► switches the mode for aspect ratio.
	See the ASPECT item in the IMAGE menu. (36)
ZOOM	Using the buttons ◄/► adjusts the zoom.
	See the ZOOM item in the SETUP menu. (40)
KEYSTONE	Using the buttons ◄/► corrects the keystone distortion.
	See the KEYSTONE item in the SETUP menu. (40)

Using the buttons ◄/► switches the mode of picture type.

The modes of picture type are combinations of a mode of GAMMA (33) and a mode of COLOR TEMP. (34)

Choose a suitable mode according to the projected source.

NORMAL  CINEMA  DYNAMIC

MODE

NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)

CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT)

DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT)

•When the combination of GAMMA and COLOR TEMP differs from pre-assigned modes above, the display on the menu for the MODE is “CUSTOM”.

BRIGHT	Using the buttons ◄/► adjusts the brightness.
	See the BRIGHT item in the PICTURE menu. (33)
CONTRAST	Using the buttons ◄/► adjusts the contrast.
	See the CONTRAST item in the PICTURE menu. (33)
	Using the buttons ◄/► adjusts the strength of whole color.
COLOR	See the COLOR item in the PICTURE menu. (34)
	• This item can be chosen only for a video signal.
	Using the buttons ◄/► adjusts the tint.
TINT	See the TINT item in the PICTURE menu. (34)
	• This item can be chosen only for a video signal.

31