Connecting power supply | Hitachi EDPJ32 instruction

Preparations

Connecting power supply

Before connecting, make sure that the power switch is the OFF position (pressed the side marked “O”).

1. Connect the connector of the power cord to the AC inlet of the projector.

Power switch	AC inlet
	AC inlet
	Connector of the power cord

2. Firmly plug the power cord's plug into the outlet.

WARNING ►Please use extra caution when connecting the power cord as incorrect or faulty connections may result in ﬁre and/or electrical shock.

•Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one.

•Only plug the power cord into an outlet rated for use with the power cord's speciﬁed voltage range.

•Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.

•The power outlet should be close to the projector and easily accessible.

•Do not touch the power cord with a wet hand.

•Check that the connecting portion of the power cord is clean (with no dust) before using. Use a soft and dry cloth to clean the power plug.

•Insert the power plug into a power outlet ﬁrmly. Avoid using a loose, unsound outlet or contact failure.

16

Image 16

Hitachi EDPJ32 user manual Connecting power supply

Contents

Thank you for purchasing this projector Trademark acknowledgmentEDPJ32 User’s Manual - Operating Guide Content Power on/offBefore use Preparations Multifunctional settings MaintenanceTroubleshooting Warranty and after-service Before use Projector featuresAbout this manual About contents of package Projector Part names47, 48 Remote control Control buttons Preparations Fastening the lens cover Tabs About the ﬁlter cover bottom-up useFilter cover’s knob Filter cover for bottom-up use with an air ﬁlter When put on a table When suspended from the ceiling Arrangement For 169 screens For 43 screens Elevator feet Adjusting the projector’s elevatorElevator button Connecting your devices Examples of connection with a VCR/DVD player Examples of connection with a computer Example of computer signal About Plug-and-Play capability Connecting power supply Loading batteries into the remote control Using the remote control Power on/off Turning on the power Turning off the power Operating Adjusting the volumeTemporarily muting the sound Searching an input signal Selecting an input signalPOWER INPUT For a 169 signal For a 43 signal For no signal 43  Selecting an aspect ratio Adjusting the zoom magnifying power Adjusting the focusUsing the automatic adjustment feature  For an RGB signal Adjusting the position Correcting the keystone distortions Using the partial magnify feature Freezing the screen Temporarily blanking the screen Multifunctional settings Using the menu function1. To display a menu 2. To choose the target menu 3. To choose the target item 2 Advanced MENU → One of Advanced menus ex. SETUP menu3 Advanced MENU → EASY MENU 1 In the EASY MENU ex. KEYSTONE 6. To reset 4. To operate5. To return to the previous menu 7. To close the menu EASY MENU EASY MENU continued To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM PICTURE menuUsing a test pattern To adjust CUSTOM PICTURE menu continuedGAIN adjustments mainly affect color intensity on Using the buttons / switches the progress mode IMAGE menu When this adjustment is too large, certain degradation may appear IMAGE menu continuedat the frame area of the picture. In such a case, please adjust small Choosing this item performs the automatic adjustment feature INPUT menu SETUP menu MIRROR item in the SETUP menu, if the projector screen is inclined SCREEN menu Although the adjustable range will vary depending on inputs, and SCREEN menu continuedthe frame may not move for some signals. To restore the screen MyScreen Lock MESSAGE automatically. When the time is set to 1 to 99, and when the passed OPTION menublinking. Please refer to the section “Turning off the power”.  OPTION menu continued press the ENTER button on the remote control or the INPUT button you to clean “REMINDER...” will appear after the timer reaches thecontinued 50h  100h  200h  300h  TURN OFF Maintenance Lamp In the case of replacement by yourself Type number = DT00707 1 Press the MENU button to display a menu Air ﬁlter Type number = NJ22642Usual ﬁlter cover Filter cover for bottom-up use Filter cover for bottom-up use Inside of the projector Caring for the cabinet and remote controlCaring for the lens Troubleshooting There is no input signalA note of precaution when cleaning the air ﬁlter Related messages Regarding the indicator lamps The projector is cooling down. A certain errorThe projector is in a standby state The projector is in an on state Regarding the indicator lamps continued Phenomena that may easily be taken as machine defects If the situation cannot be corrected Perform picture adjustments by changing the COLOR TEMP, COLOR Warranty and after-service Speciﬁcations Dimension diagram 202 285Speciﬁcations 33.5